Flylinktech® Replacement Digitizer and Touch Screen LCD Assembly for White Apple iPhone 4S (for AT&T/Verizon/Sprint iPhone…Building Materials List News]

[wpramazon asin=”B00DPTU6ZC”]

3 Responses to Flylinktech® Replacement Digitizer and Touch Screen LCD Assembly for White Apple iPhone 4S (for AT&T/Verizon/Sprint iPhone…Building Materials List News]

  • bulletstopper says:
    15 of 16 people found the following review helpful
    3.0 out of 5 stars
    Arrived quick. Screen isn’t as bright as my original. Viewing angle very limited. Worth the 17 bucks but not much more., October 27, 2014
    By 
    bulletstopper (Md USA) –

    Verified Purchase(What’s this?)
    This review is from: Flylinktech® Replacement Digitizer and Touch Screen LCD Assembly for White Apple iPhone 4S (for AT&T/Verizon/Sprint iPhone…
    I am reviewing the LCD touch screen for an iPhone 4s AT&T. This review is going to be as honest as it gets. The screen arrived in about a week directly from China. That didn’t bother me as I realize all this stuff is made over there anyway. When I opened the packet that it came in, I found the screen to be very well protected. That was a plus. The tools were fine. They consisted of two plastic levers, a micro slotted screw driver, a micro Phillips, a really pointy Phillips to get the two bottom screws out, a SIM card removal tool, and three guitar pick looking things. They actually came in handy. And a little suction cup that I found no use for. The only other thing you may need is a small knife, and some tweezers. I am an electrician by trade so I have some experience at this kind of thing. Just not anything this small. It is a very slow, methodical, maddening process. Not the task itself, just the fear of dropping a small screw or clip. Or tearing a ribbon cable, or mashing a pin. It took me about two hours from start to finish so settle in. Take your time, and above all, don’t force anything. All of this stuff is made to an exacting tolerance. If you have to force it, something is wrong. Stop and evaluate what you’re doing. Anyway once the screen was in I fired it up. The first thing I noticed was that the screen wasn’t able to attain the same brightness. Where my original screen really was bright and popped, this one had kind of a blueish dimness. Looks more like my old iPhone 3GS. Not bad, just not as nice. The side view is not good at all. If you try and look at it from the bottom or side it really washes out bad. Straight on it’s ok. If I ever have problems with it I will update this review. The first hour or so it’s worked fine. The bottom line is this. If you are expecting this screen to be good as original manufacturer you will be disappointed. I am getting a new phone here in just over 6 months so this will do just dandy for me until then. If I had paid a guy to put this screen in, I would have been upset, but since it cost me less than 20 bucks, it was worth it. UPDATE #1: Compared my old 3GS with this new screen and found that the new screen is actually brighter. I also forgot to mention the touch functions very well. Swipes and taps register as you would expect and were very responsive.
    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No

  • M. Russell says:
    10 of 10 people found the following review helpful
    5.0 out of 5 stars
    Great Screen, August 20, 2014
    By 
    M. Russell (Florida) –
    (REAL NAME)
      

    Verified Purchase(What’s this?)
    This review is from: Flylinktech® Replacement Digitizer and Touch Screen LCD Assembly for White Apple iPhone 4S (for AT&T/Verizon/Sprint iPhone…
    I read the mixed reviews on this piece before I purchased it and wasn’t sure if it was any good. However, all of the other ones out there had the same 50/50 reviews except the expensive OEM version. So, I went ahead and ordered it and after installing it I have to give it 5 stars. It’s works flawlessly. Obviously, if it quits in a month I’ll change this but for now I’m completely satisfied.
    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No

  • Anonymous says:
    4.0 out of 5 stars
    Works for AT&T IPhone 4S!, August 20, 2015
    By 
    West Coast Surf Mama (Southern CA) –

    Verified Purchase(What’s this?)
    This review is from: Flylinktech® Replacement Digitizer and Touch Screen LCD Assembly for White Apple iPhone 4S (for AT&T/Verizon/Sprint iPhone…
    Most importantly, broken phone now works! If anyone says their phone doesn’t work, I’d suspect they didn’t put it back together properly. (I had to try twice to get my wifi working, but that was no fault of this kit.) This is a lengthy process, which takes most 1-2 hours, and there are MANY places you could go wrong putting it back together. Also very easy to lose or accidentally put back screws in the wrong places. The 4 stars are because it does not come with any instructions, a flat head screwdriver (for 2 screws inside which needed that), and the screen may be a bit dimmer than original. I did not need the suction cup or guitar pic tool. It should be noted that heat in the form of a hair dryer or heat gun is required to loosen the vibrator inside to access one of the screws. I followed directions from this Youtube video. https://www.youtube.com/watch?v=8fujLMaxJsw My phone now works completely! Much better than purchasing a new phone! I will say, if you have trouble with close up vision, or don’t have a couple hours to try this, it may be worth paying a professional to do. There’s around 30 tiny screws in there!
    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No

Leave a Reply

Your email address will not be published. Required fields are marked *